The maintenance of the amusement equipment can effectively extend the service life.

The maintenance of the amusement equipment can effectively extend the service life.

We know that the children’s naughty castle paradise is very important and very basic is the amusement equipment. For the naughty castle operators, the selection of the amusement equipment can bring high popularity to the attraction of the park. Maintaining the amusement equipment of the park can extend the life of the equipment, while ensuring the safety of consumers and bringing long-term benefits to the park. Then, how to maintain the amusement equipment in the indoor children’s playground in order to extend its service life? In the course of operation, several maintenance methods can effectively extend the service life:

1. Plastic part and glass fiber can be diluted with soapy water, disinfecting washing powder, bleaching powder, etc., then wiped with soft cloth or soft brush, then rinsed with water, dried with a cleaning cloth or dried, and finally sprayed 84 disinfectant Disinfection; Moisture-resistant, heat-resistant, non-fading wood parts, can be washed with soapy water, dried, and sprayed with 84 disinfectant.

2, the soft sponge part can be scrubbed with soft cloth dipped in soapy water, or placed in the sun to expose to the sun; if it is indoor activity room, floor, wall, etc., daily UV disinfection, indoor ventilation, weekly disinfection with hydrogen peroxide spray once.

3. If the metal part needs to be rusted, use a brush to remove the rust and wipe it with a dry cloth. After exposure to sunlight, use a colorless self-spraying paint to spray it about 20 cm away and spray it again. It plays a protective role. After the paint is completely dry, it is cleaned, dried and disinfected. At the same time of disinfection, it must be checked whether the joint part is firm, whether the metal frequently connected parts are lubricated, whether the circuit electrical appliances and ordinary parts are damaged.

4, when the naughty circuit electrical parts are partially cleaned, first of all to ensure that the power is cut off, watering is prohibited, generally scrubbed with a damp cloth, and then connected to the power supply after drying.

5. All amusement equipment, open-air slides and drill cylinders should not have accumulated water after rainy days. If there is accumulated water, a drainage hole with a diameter of 4 mm should be used at the lowest point for drainage.