The main maintenance methods of amusement equipment are as follows

The main maintenance methods of amusement equipment are as follows:

1: After dipping and soaking the plastic part and glass fiber, they can be diluted with soapy water, disinfecting washing powder, bleaching powder, etc., scrub with a soft cloth or a soft brush, and then rinse with water, wipe or dry with a cleaning cloth. Finally, disinfect with 84 disinfectant spray.

Twenty-two: The soft sponge part can be washed with a soft cloth moistened with soapy water, or placed in the sun for disinfection.

3: Moisture-resistant, heat-resistant, non-fading wooden parts can be washed with soap and water, dried, and sprayed with 84 disinfectant.

Four: If the metal part is required to remove rust, you can use a brush to remove the rust and clean it with a dry cloth. After exposure to the sun, you can buy a colorless Sanhe self-painting paint at a distance of about 20 cm, spray it once while scanning, wait Spray again after drying for protection. After the paint is completely dry, wash, dry, and disinfect.

Fifth: When cleaning the electrical parts of the circuit, you must first ensure that the power is turned off and watering is prohibited. Generally, use a wet cloth to scrub it, and then connect it to the power supply after it is completely dry.

26: All amusement equipment, outdoor slides and drill pipes should not have accumulated water after rainy days. If there is, a hole with a diameter of 4 mm should be drilled at the lowest point to drain water.

XXVII: If it is an indoor activity room, floor, wall, etc., daily ultraviolet radiation disinfection, the room should always be ventilated. Disinfect with hydrogen peroxide spray once a week.

28: Of course, at the same time of disinfection, you must also check whether the connection part is firm, the metal is frequently moving, the connection part is oiled, and the circuit appliances and ordinary components are not damaged.

小 Here we remind consumers that before taking rides, we must do “Four Looks”: Look at the crowds of rides. Whether the rides are suitable for your physical condition, understand the requirements of the facility for patients with age or certain diseases, and choose the right rides for your consumption.

Second look at the passenger notice. Understand the sports characteristics, instructions for use, safety protection instructions and warnings of the amusement facilities, so that you can know the best. Listen carefully to the safety knowledge explanations and safety matters explanations made by the staff, and ask questions if they are unclear.

23. Look at the security signs. Check whether the equipment has a safety inspection certificate and is within the validity period of the inspection. Do not ride on amusement facilities without a registration certificate for use and without a periodic inspection report.

24. Look at the safety device. To see if the safety devices (such as seat belts, safety bars, etc.) are complete and effective. If there are inadequate safety devices or cannot be used normally, refuse to ride or play.

At the same time, consumers should be careful not to take children to ride the more dangerous amusement facilities; when they ride, they must obey the arrangements of management personnel, consciously fasten safety belts and other safety protection devices, and cooperate with safety protection measures; Don’t panic about the problem. Obey the instructions of the staff to avoid unnecessary harm. If you find any recreational facilities without a certificate or safety inspection, report them in a timely manner to facilitate investigation and punishment by relevant departments and ensure the safety of other consumers. There has been a safety accident in the area, and we must pay attention to retaining on-site evidence in order to complain in the future.