Easy to disassemble and repair the amusement equipment
The daily maintenance work of the amusement equipment is familiar to the operators, and the screws and nuts are the indispensable parts of the mechanical amusement, and they play the role of connection and fixation. When the equipment fails and cannot operate normally, it requires our technicians to dismantle and repair the internal components. In the process, it will inevitably encounter some small problems with the screw nut. The following small series will introduce several small coups for different situations.
First, the disassembly of the broken head screw
For mechanical amusement equipment, most of them are operated outdoors, so the occurrence of broken screws is also happening from time to time. To disassemble this type of screw, drill holes in the screw, insert a multi-twisted steel cone, and screw out the screw. Note that the striking force should not be too large to prevent damage to the female thread. If the screw breaks in the center of the broken end below the surface of the machine, the counter-rotating screw in the hole is screwed out with the corresponding reverse rotation screw or tap; if the screw is broken on the surface of the machine, it can be added on the broken head. The welding screw is pulled out, or a groove is sawed by a hacksaw on the protruding break, and then screwed out with a screwdriver. Drill the screw of the entire amusement equipment with a drill bit, replace the screw slightly larger than the original screw diameter, and select the corresponding nut.
Second, the removal of rust screws
After experiencing various natural conditions such as wind, sun, rain and rain, the rust of the screws of the amusement equipment is also normal in the disassembly. In dealing with this type of problem, you must first tap the screws (screws, nuts, etc.) around your hand to shatter the rust layer and then unscrew it; you can first twist a little in the direction of tightening, then in the opposite direction. Screw, so reversely screw out; pour some kerosene around the screw, or put the cotton yarn with kerosene, soak for about 20 minutes, use the strong penetration of kerosene, infiltrate the rust layer, gradually loosen the thread and then screw Out.
Third, the disassembly of the group of threaded joints
The disassembly of the group of threaded joints, in addition to the removal according to the method of a single thread, must also do the following: First, loosen the bolts 1~2, and then remove them one by one according to the regulations. These three kinds of problems are common problems encountered in the process of maintenance and disassembly. For amusement equipment to create greater value, it is necessary to do daily maintenance and regular maintenance work.
Easy To Disassemble And Repair The Amusement Equipment Related Video:
"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our firm for the long-term to create jointly with consumers for mutual reciprocity and mutual reward for Indoor High Ropes Course , Fitness Trampoline , Residential Indoor Playground Equipment , With the support of our highly experienced professionals, we manufacture and supply best quality products. These are quality tested at various occasions to ensure only flawless range is delivered to customers, we also customize the array as per the need of customers to meet the requirement of customers.